Rod & Reel Racks
Rod & Reel Racks
Here's some Show & Tell photos of my Reels, Rods and Rod Racks that I accrued over the years.
- Attachments
-
- 1st rack was purchased
- WallMountRack1.jpg (92.94 KiB) Viewed 7529 times
-
- 2nd rack - I thought I could improve it by alternating reel sides
- WallMountRack2.jpg (158.02 KiB) Viewed 7529 times
-
- 3rd rack - I didn't like the poles drooping in the middle
- WallMiountRack3.jpg (103.15 KiB) Viewed 7529 times
-
- 4th rack - for accessibility
- FreeStandingRack.jpg (87.29 KiB) Viewed 7529 times
Re: Rod & Reel Racks
Continuation of Show & Tell
- Attachments
-
- Built for neighbor from pallet wood
- FreeStandingRodRack2.jpg (273.5 KiB) Viewed 7528 times
-
- Mitchell row collection at shop bench
- ShopRowCollection.jpg (228.39 KiB) Viewed 7528 times
-
- Shop bench back wall collection
- ShopBackWallCollection.jpg (242.43 KiB) Viewed 7528 times
-
- Shop Combo Bench - Solder Station and Reel bench (very Messy)
- ShopWorkbench.jpg (375.52 KiB) Viewed 7528 times
Re: Rod & Reel Racks
Built this a few years ago. a 2x3 45degree holes and dowels.
- Attachments
-
- Some 408 - 308 - 204's.jpg (75.17 KiB) Viewed 7513 times
Not home retired and fishing! Or playing with my Mitchell's!
Re: Rod & Reel Racks
Much nicer than what I did. Are you using rubber bands to bind the reels to the dowels?
I just found some scrap 1x2 and used the table router to cut some 3/8" slots every 4 inches or so on the backside and mounted it to the 2x6. It works well. I had earlier rigged something else up on the 2x6 but I accidently bumped a 304 reel and it crashed onto the bare concrete floor. The fall really messed up the rotor, so I knew I had to do find a better way.
I just found some scrap 1x2 and used the table router to cut some 3/8" slots every 4 inches or so on the backside and mounted it to the 2x6. It works well. I had earlier rigged something else up on the 2x6 but I accidently bumped a 304 reel and it crashed onto the bare concrete floor. The fall really messed up the rotor, so I knew I had to do find a better way.