Early Mitchell PUMs

[[email protected]]

What year did the 1St MPU come out for the 306 and 302?

[Sandman]

rlw, I show 1970 for the 302 and 1972 for the 306. These were the first PUM production years of these models. Not many of each were made. The PUM part may have been available for conversion earlier.

Sandman

[Wallace Carney]

rlw, I show 1970 for the 302 and 1972 for the 306. These were the first PUM production years of these models. Not many of each were made. The PUM part may have been available for conversion earlier. Sandman

Hello Sandman, In checking my files I see the 302 first came out in 1954 for both the part and the reels sold as PUMs. I don't have any ads for the 306 PUM but the part was first available in 1964. Hope this helps, Wallace

[[email protected]]

I KNOW THE FIRST PUM CAME OUT A BALL BERING ROLLER.LATER THEY WENT TO A SLEVE TYPE ROLLER. YHEY WERE PRETTY COOL CAUSE IF YOU WERE FISHING AND YOUR BAIL SPRING BROKE YOU COULD SWITCH THEM OUT AND KEEP FISHING!!!

[Sandman]

Thanks Wallace, I knew when I was writing those years for the PUM it didn't seem correct because I thought I had seen them advertised earlier, but my records didn't indicate that....apparently my PUM records aren't very accurate...thanks for the correction.

Sandman

[Wallace Carney]

Hi Sandman, Here's the ad you're missing for your records:

Mitchell 302 - 1954 Ad.jpg (92.07 KiB) Viewed 25979 times

Kind Regards,
Wallace

[Sandman]

Thanks Wallace, I did not have that advert...I noticed is says it is easily convertible to a manual pick up. Does this mean it came with a full bale and an additional PUM part, or it was available to purchase with the PUM attached and no full bale? I read it as it came with with a full bale and the PUM part you could purchase separately.. Not a big deal, just curious.

Sandman

[Wallace Carney]

Sandman, It either came with a full bail for $37.50 or a Mitchell 302 PUM left or right handed for $34.50. Extremely rare,,, I've only seen one with PUM sticker on the box. Hope this helps. Kind Regards, Wallace

[Sandman]

Thanks Wallace...interesting....it does seem like I've seen one somewhere, maybe once.....rare indeed

Sandman

[John Fishkat]

Hey Mates,

I always like to source material as much as possible. Reasons for that include being able to view/collect the original and to better understand its context (for example, magazine ad, poster, consumer catalog, or trade material).

The pages 6 & 7, Wallace posted above, come from the 1955 Garcia Balanced Spinning Tackle Catalog, which likely would have been available to fishers in late 1954 (maybe November?).

John

5500 Garcia Balanced Catalog cover.jpg (171.76 KiB) Viewed 25915 times

[John Fishkat]

Hey Mates,

The earliest I could find the Manual Pick-Up Attachment being cataloged is pg 60 of The Spin Fisherman Magazine (published quarterly by Charles Garcia) that included a copy of what is viewed as the 1954 Garcia Catalog. [In case anyone is wondering about the Atlantis and Spinette, they were made by Plate (Germany).]

John

5400 Garcia Catalog 60 PUM.jpg (167.26 KiB) Viewed 25914 times

5400 Garcia Catalog 01 cover sm.jpg (181.64 KiB) Viewed 25914 times

5400 Garcia Catalog 00 hardcover sm.jpg (202.36 KiB) Viewed 25914 times

[Sandman]

Nice work John! The reel didn't come out much before then. Maybe one year.

Sandman

[Wallace Carney]

Hello Mitchell Mates,

1st off: I have split the Dennis Roberts topic into two different subjects namely Dennis Roberts Books and then when we got off on talking about PUMs, the second half of the split is as you can see: Early Mitchell PUMs!

2nd off: We can't talk about early Mitchell PUMs without exposing my most desired part. Mitchell came out with a part to convert half bail reels to a PUM as you can see below:

Mitchell 300 PUM 1949 1.JPG (55.67 KiB) Viewed 25855 times

Mitchell 300 PUM 1949 2.JPG (46.18 KiB) Viewed 25855 times

Mitchell 300 PUM 1949 3.JPG (44.87 KiB) Viewed 25855 times

The one shown is a very early 3rd version Mitchell Half Bail I converted to a PUM after finding the part in a grungy old box of Mitchell parts, some new but mostly old. When I first saw it I couldn't believe my eyes but here it is. A few years later I spotted a Mitchell 2nd version PUM intact (not shown). I now don't have the time or the energy to search for these and hope one of you does a daily search for what I believe to be the rarest most desirable part! Happy Hunting.

Best Regards, Wallace

[Ted Lanham]

Wallace,
Now that's a needle in a thousand hay stacks.

Regards,
Ted Lanham

[Sandman]

Thanks Wallace. I believe that part is shown on the 2nd version pamphlet that came with the reels. Can't find the pamphlet right now. I've never come across one.

Sandman

[Wallace Carney]

Thanks Wallace. I believe that part is shown on the 2nd version pamphlet that came with the reels. Can't find the pamphlet right now. I've never come across one. Sandman

Hello Sandman, Here's the 300 Owner's Manual for a 2nd version reel you spoke of.

English 1 copy.jpg (132.46 KiB) Viewed 25800 times

English 2 copy.jpg (137.08 KiB) Viewed 25800 times

I also have the same manuals in French, Dutch and German but they show 3rd version reels with the same PUM as the above.

Regards,
Wallace

[Sandman]

Yep, that’s it….and it’s not a half bail….it’s a heavy duty pick up arm…wonder where the term half bail came from…maybe another manufacturer?

Sandman

[Wallace Carney]

Sandman,

The terms half bail and full bail came out just when the full bail was introduced. The term "Bail" came from the full bail wire looking like the arm or handle of an old basket. Again, when the full bail became popular, the terms full bail and half bail became the proper "English" terms to identify which was which. Another term used for the half bail was "finger bail" cause it looked like a curved index finger. The PUM (pick-up manual) aka MP (manual pickup) became common terms used for all reels with this feature.

Sometimes I scare myself!

Regards,
Wallace

[Sandman]

All that makes sense.

And heavy duty it was...not a dainty part...I can see where the term 'claw bail' came from...

Sandman

[cshannon772]

Hi Mates,

The earliest advertising for a 306 PUM (accessory) that I could find was from the 1963 Garcia Fishing Annual. That doesn't necessarily indicate that a Mitchell 306 was available as a PUM, but the accessory was available to convert it as such.

306 PUM.jpg (275.16 KiB) Viewed 25733 times

306 PUM 1.jpg (180.05 KiB) Viewed 25733 times

Initially, I thought it was advertising a 305 PUM but those were never made and closer inspection proved it to be for the 306. Hope this helps.

Kind Regards,
Chris