Micthell Garcia 410 Rod and Reel

Our Mitchell Museum gets many great questions we'll try to post here to help more than one person...
Post Reply
User avatar
ColoradoAngler
Posts: 3
Joined: Thu Mar 02, 2023 10:28 pm

Micthell Garcia 410 Rod and Reel

Post by ColoradoAngler »

When I was young, my dad presented me with two new Mitchell-Garcia rod/reel combos, a 510 and 410. I've used the rods and reels for well over 50 years. Last year I took the 510 with me to Canada and landed dozens of 8-14 pound Northern pike. An angler at the camp looked at my gear and told me how rare my 510 rod and reel combo was and suggested that I retire the gear so that I didn't break either the rod or reel. (Both combos are in very good condition, and all original.)

While searching the internet, I was able to find a few 510 reels on the market, and a Mitchell Garcia flyer for the 510 & 508. However, the only information I can find on the Mitchell Garcia 410 reels have the traditional reel mount, rather than the fork. I've attached a photo of my 410 rod base and reel. The handle and knob on the pictured 410 has been switched with my 510, as I prefer the flat knob rather than the torpedo style when fishing.

How do I determine the age and value of my 510 and 410 combo sets?

Thanks.
Attachments
Mitchell Garcia 410
Mitchell Garcia 410
410.jpg (71.14 KiB) Viewed 4459 times


User avatar
piscesman
Posts: 204
Joined: Mon Jun 14, 2021 10:24 pm

Re: Micthell Garcia 410 Rod and Reel

Post by piscesman »

CA, someone switched the cover on your forked foot reel. It should have a 510-side plate not a 410-side plate. Both are interchangeable. The serial number is stamped on the outer rim of the forked foot reel. I can see it cover plate side between the 2 brass seats. They were made between 1969 & 1971. Approx 41,307. Hope this helps.
Kim


User avatar
ColoradoAngler
Posts: 3
Joined: Thu Mar 02, 2023 10:28 pm

Re: Micthell Garcia 410 Rod and Reel

Post by ColoradoAngler »

Kim,

Thanks for the information. You're right, it is a 510 (5 +revolutions of the bail to one crank of the handle.) I'm sure my dad and I never removed the cover and replaced it with a 410 cover, as we were never that sophisticated when cleaning reels. I'm wondering if the reel came that way from the factory in France.
I looked all over the outside of the reel and still don't see the serial number. I guess it is irrelevant now that you told me the years the reels were manufactured.
Best wishes.


User avatar
GreatLaker
Posts: 258
Joined: Sat Jun 12, 2021 1:05 am

Re: Micthell Garcia 410 Rod and Reel

Post by GreatLaker »

ColoradoAngler,
May we see a photo of both of your outfits? Perhaps we can offer a few suggestions that will help.
Kind Regards,
Bill


User avatar
ColoradoAngler
Posts: 3
Joined: Thu Mar 02, 2023 10:28 pm

Re: Micthell Garcia 410 Rod and Reel

Post by ColoradoAngler »

Bill, here are photos of my "410" and 510 reels. Thanks.
Mitchell "410"
Mitchell "410"
Mitchell 410.jpg (205.62 KiB) Viewed 4400 times
Mitchell 510
Mitchell 510
Mitchell 510.jpg (257.7 KiB) Viewed 4400 times


User avatar
GreatLaker
Posts: 258
Joined: Sat Jun 12, 2021 1:05 am

Re: Micthell Garcia 410 Rod and Reel

Post by GreatLaker »

Here is a 2-page ad from the Garcia Annual 1970 showing what the 510 rod and reel looked like and gives some information.
Kind Regards,
Bill
1970 Mitchell 500-GrcaAnnul-edited.jpg
1970 Mitchell 500-GrcaAnnul-edited.jpg (255.66 KiB) Viewed 4389 times
1972 circa Garcia Mitchell 510 and 508-edited.jpg
1972 circa Garcia Mitchell 510 and 508-edited.jpg (122.25 KiB) Viewed 4389 times


Post Reply