Right 300 SN

Our Mitchell Museum gets many great questions we'll try to post here to help more than one person...
Post Reply
User avatar
Jamesbond
Posts: 5
Joined: Sat Sep 30, 2023 1:24 am

Right 300 SN

Post by Jamesbond »

306724
Thanks steve


User avatar
Ted Lanham
Posts: 258
Joined: Tue Jun 15, 2021 4:00 pm

Re: Right 300 SN

Post by Ted Lanham »

Jamesbond,
:text-welcomeconfetti: to the Mitchell Reel Museum. If that is the complete SN, then Wallace states that it was made in 1954. Sometimes the full SN doesn't get stamped completely. A picture would tell us if is likely from that year or not.

Regards,
Ted Lanham


User avatar
Jamesbond
Posts: 5
Joined: Sat Sep 30, 2023 1:24 am

Re: Right 300 SN

Post by Jamesbond »

IMG_20231004_203230.jpg
IMG_20231004_203230.jpg (738.16 KiB) Viewed 11733 times
Attachments
IMG_20231004_203230.jpg
IMG_20231004_203230.jpg (738.16 KiB) Viewed 11733 times


User avatar
Jamesbond
Posts: 5
Joined: Sat Sep 30, 2023 1:24 am

Re: Right 300 SN

Post by Jamesbond »

IMG_20231004_210400.jpg
3067624 or 3067024 number between 7 & 2 hard to read
Thanks Steve


User avatar
Wallace Carney
Posts: 174
Joined: Fri Jun 11, 2021 12:09 pm
Location: Asheville, NC USA
Contact:

Re: Right 300 SN

Post by Wallace Carney »

Hi Steve,

You went from 6 digits to 7 on the serial number. Which is it? Also, I can’t see what’s to the right of Mitchell on the cover plate. Is there anything there?

Thanks,
Wallace


User avatar
Jamesbond
Posts: 5
Joined: Sat Sep 30, 2023 1:24 am

Re: Right 300 SN

Post by Jamesbond »

7 numbers 3067624 i was going to take a photo of the serial number but it will be to blurry
Thanks for the help
Steve


User avatar
Wallace Carney
Posts: 174
Joined: Fri Jun 11, 2021 12:09 pm
Location: Asheville, NC USA
Contact:

Re: Right 300 SN

Post by Wallace Carney »

Steve, According to my dating chart, your reel would be circa 1960. Hope this helps. Regards, Wallace


User avatar
Jamesbond
Posts: 5
Joined: Sat Sep 30, 2023 1:24 am

Re: Right 300 SN

Post by Jamesbond »

Wallace
Thank you for the information what's the spool size on that if possible
Stands
Steve


User avatar
piscesman
Posts: 204
Joined: Mon Jun 14, 2021 10:24 pm

Re: Right 300 SN

Post by piscesman »

I'm glad to see Wallace has been here answering questions. Unless I'm mistaken the handle on your reel is not correct for the time period of your reel. The plastic nut end and circles on the shaft part of the reel was made years later than the right one. It shouldn't be too hard to find the correct one though.......
Kim


Post Reply