Vintage Mitchell 308

[richie7799us]

Hello, where can I get a schematic and parts list for a vintage Mitchell 308

[Ted Lanham]

richie7799us,
We used to have schematics here on the Museum till all that was lost, for now, but if you google "Mitchell 308 schematics" one of the first results is for Mike's reel repair. You can find what you need there, but you need to watch out for the reels that have a "5" on the back of the spinning head. Early 308's used bail springs that had 4 wraps and the later ones had 5 wraps, so make sure any replaced bail springs are the same as you are replacing. There are several parts suppliers on ebay and various others that fill your needs. If I've missed anything here, I welcome the correction.

Regards,
Ted Lanham

[don309]

Here is one.

[Bailarm]

82 424.

Are there any left anywhere? I'm told there are none in Europe at all!

[don309]

Quite a few on ebay, but the prices are out of hand.

[Ted Lanham]

Mates,
I was just curious, so I did a search for part 82424, and the only thing I found was a site that had a strange name, maybe Asia, that claimed they had one. Even checked completed sales on ebay. It sounds like those are going the same way that of new 300 faceplate screws.


Ted Lanham

[Sandman]

There are not many on ebay right now...below is one in France.

https://www.ebay.com/itm/293825450807?e ... SwDXlfq73e

[toulady6]

Hello mates ,

found some

IMG_0072 (3).JPG (33.36 KiB) Viewed 4956 times

regards Dries

[Sandman]

Nice find Dries...I have about 1/2 dozen spares...love the display on a 308 field kit.

Sandman