service tools

Discussions on How to Service Your Mitchell Reel and more...
Post Reply
User avatar
kevin cozens
Posts: 15
Joined: Mon Dec 04, 2023 9:54 pm

service tools

Post by kevin cozens »

I watched a video that Wallace Carney posted on YouTube were he was servicing a bail arm on a 300
I noticed he had a little tool that he used to undo the screws. He also had a little tool to bend the latch back in line.
Where can I get these two tools from. I only have the tool that comes with a 600 series multiplier


User avatar
GreatLaker
Posts: 267
Joined: Sat Jun 12, 2021 1:05 am

Re: service tools

Post by GreatLaker »

Kevin,
Here is a re-post from Wallace himself from back in November 2009 to answer your question.

Author: Wallace Carney [ Mon Nov 09, 2009 8:55 am ]
Post subject: Mitchell Tools
______________________________________
Hello Mates,
This Mitchell tool kit shown below was offered for sale by Garcia to dealers for service starting in 1955/56. As you can see from the Case Contents list; this kit was for The Mitchell (300), CAP, Otomatic (330) and The Saltwater (302) referred to as "M. MER" for some unknown reason. If anyone knows why, please let us know! Please note that the contents list states "small wooden work board" which is missing from this kit but please note the fifties ad I've shown does not have this board either.
MRM Post by W.Carney 11-9-2009 Repost 12-24-resized.jpg
MRM Post by W.Carney 11-9-2009 Repost 12-24-resized.jpg (90.98 KiB) Viewed 34 times
MRM Post W.Carney 11-9-2009-p2.jpg
MRM Post W.Carney 11-9-2009-p2.jpg (118.04 KiB) Viewed 34 times
MRM Post W.Carney 11-9-2009-p3 resized.jpg
MRM Post W.Carney 11-9-2009-p3 resized.jpg (117.43 KiB) Viewed 34 times
Both of these can be rarely found on eBay and normally sell cheap so start looking
Best Regards, Wallace


Sorry but I can only have 3 photos per post so this is going to be PART 1. See PART 2 in the next post.
Kind Regards,
Bill


User avatar
piscesman
Posts: 210
Joined: Mon Jun 14, 2021 10:24 pm

Re: service tools

Post by piscesman »

Great pictures Bill. Yes, those tools command a big premium. Missed several chances years ago on the bay. Most people improvise and make some tools to suit their needs. Good Luck..........
Kim


User avatar
GreatLaker
Posts: 267
Joined: Sat Jun 12, 2021 1:05 am

Re: service tools-Part 2

Post by GreatLaker »

Kevin,
Here is a re-post from Wallace himself from back in November 2009 to answer your question.

Continued from earlier Post. PART 2
Author: Wallace Carney [ Mon Nov 09, 2009 8:55 am ]
Post subject: Mitchell Tools

This Mitchell tool kit shown below was offered for sale by Garcia to dealers for service starting in 1960/61. As you can see from the Case Contents list; this kit was for Mitchell spinning reels being sold by the late fifties however; I find it odd that the 350 "Rapid" is not listed even though it was also being sold! Anyway… I could not find any ads for this tool kit but from the list, it appears to be complete.
MRM Post W.Carney 11-9-2009 Pt.2-p1 Resized.jpg
MRM Post W.Carney 11-9-2009 Pt.2-p1 Resized.jpg (81.85 KiB) Viewed 32 times
MRM Post W.Carney 11-9-2009-Pt.2-p2 resized.jpg
MRM Post W.Carney 11-9-2009-Pt.2-p2 resized.jpg (94.74 KiB) Viewed 32 times
MRM Post W.Carney 11-9-2009-Pt.2-p3.jpg
MRM Post W.Carney 11-9-2009-Pt.2-p3.jpg (26.78 KiB) Viewed 32 times
Both of these can be rarely found on eBay and normally sell cheap so start looking
Best Regards, Wallace


Hope This answers your question.
Kind Regards,
Bill


Post Reply