Mitchell 300 logo

Our Mitchell Museum gets many great questions we'll try to post here to help more than one person...
Post Reply
User avatar
David66
Posts: 3
Joined: Thu Jun 24, 2021 9:37 pm

Mitchell 300 logo

Post by David66 »

I bought a Mitchell 300, serial number B64413. I've seen lots of Mitchells and the logo, Mitchell, on the side always looks fine line etched and filled with white paint. This reel has Mitchell in wider letters and the tail underneath widens at it's tip. It's also filled with white paint. I've photographed it but can't get it to upload. It doesn't look etched it looks stamped or cast. Ever run across one? I never have until now.


User avatar
Ted Lanham
Posts: 258
Joined: Tue Jun 15, 2021 4:00 pm

Re: Mitchell 300 logo

Post by Ted Lanham »

David66,
Welcome to the Mitchell Reel Museum.
Sizing the pics that you want to up load is critical. If you haven't tried keeping the size about 750 pixels wide, try uploading with that.
The earlier Mitchells logo was done with a deeper, wider depth than the later models. Does the side plate have "300" engraved after the Mitchell? Where is the serial number located?

Regards,
Ted Lanham


User avatar
David66
Posts: 3
Joined: Thu Jun 24, 2021 9:37 pm

Re: Mitchell 300 logo

Post by David66 »

Image
Attachments
20210624_174341.jpg
20210624_174341.jpg (64.75 KiB) Viewed 978 times


User avatar
David66
Posts: 3
Joined: Thu Jun 24, 2021 9:37 pm

Re: Mitchell 300 logo

Post by David66 »

thanks, the serial number is on the housing, not the foot.


User avatar
Ted Lanham
Posts: 258
Joined: Tue Jun 15, 2021 4:00 pm

Re: Mitchell 300 logo

Post by Ted Lanham »

David66,
Your Mitchell is one that was produced around 1950/1951, and has type of engraving that they used in those days. It would be considered a 4th version if it has a full bail.
Regards,
Ted Lanham


User avatar
Simone Baschirotto
Posts: 96
Joined: Thu Jun 17, 2021 7:09 pm

Re: Mitchell 300 logo

Post by Simone Baschirotto »

David66 wrote: Thu Jun 24, 2021 10:09 pm I bought a Mitchell 300, serial number B64413. I've seen lots of Mitchells and the logo, Mitchell, on the side always looks fine line etched and filled with white paint. This reel has Mitchell in wider letters and the tail underneath widens at it's tip. It's also filled with white paint. I've photographed it but can't get it to upload. It doesn't look etched it looks stamped or cast. Ever run across one? I never have until now.
it is an interesting serial number I would like to see pictures of the baffle plate, does it have a full bail?
It could be one of the first 4th version
At that moment I also believe the cranks went from aluminum to plastic.
If you can put more photos :text-thankyouyellow:


Post Reply