Well it's been Christmas in September for me after the postman yesterday.
I didn't have a 300 so I thought I better get one a bit special.
1957 model I believe in great condition and how cool does the Bill Burke custom spool look ?
Garcia product 300
Re: Garcia product 300
Perhaps some of the old hands could chime in here, but I think that oval sticker is from before '57...maybe '55? They also tended to fall off in use so finding one is not so easy.
As you said, a special 300.
As you said, a special 300.
}<)))'> Bailarm
-
Ted Lanham
- Posts: 258
- Joined: Tue Jun 15, 2021 4:00 pm
-
GreatLaker
- Posts: 233
- Joined: Sat Jun 12, 2021 1:05 am
Re: Garcia product 300
Fishabout,
Yes, a lovely 5th version with one of the hard to find oval stickers. How about a shot of the reverse side? I would also be curious to see if the threads on the handle are cut from the hub or if it has a threaded insert.
Thanks for the pics.
Kind Regards,
Bill
Yes, a lovely 5th version with one of the hard to find oval stickers. How about a shot of the reverse side? I would also be curious to see if the threads on the handle are cut from the hub or if it has a threaded insert.
Thanks for the pics.
Kind Regards,
Bill
-
GreatLaker
- Posts: 233
- Joined: Sat Jun 12, 2021 1:05 am
Re: Garcia product 300
Fishabout,
Thanks for posting more photos.
Your reel has the smaller, raised, through-hole reinforcements for the slide guide screws. These later went back to more flattened and thinner reinforcements as Wallace has shown us in his book.
I am unable to tell from the photo of the handle which type of threads you have. If you use a magnet you can check for sure, whether or not you have a steel threaded insert or an aluminum threaded hub.
Kind Regards,
Bill
Thanks for posting more photos.
Your reel has the smaller, raised, through-hole reinforcements for the slide guide screws. These later went back to more flattened and thinner reinforcements as Wallace has shown us in his book.
I am unable to tell from the photo of the handle which type of threads you have. If you use a magnet you can check for sure, whether or not you have a steel threaded insert or an aluminum threaded hub.
Kind Regards,
Bill