Mitchel Reel Musem - Mitchel Mates Discussion Group

Mitchell Reel Museum Discussion Group

If you are looking to collect, buy, repair, service, learn, ask questions or go fishing with a vintage Mitchell Fishing Reel, you are at the right place! We are just Mitchell Reel collectors and enthusiast who enjoy an open discussion forum on "vintage" Mitchell Fishing Reels. Please Click Here to learn how to make a post and ask about Mitchell reel service or repairs, get advice on buying or collecting, or any other question in this free public forum.

"Click Here to Find Vintage Mitchell Reels For Sale Worldwide"

It is currently Thu Jun 20, 2019 7:11 pm

All times are UTC - 5 hours [ DST ]




  Page 1 of 1   [ 17 posts ]
New Topic Add Reply
Author Message
 Offline
PostPosted: Wed Jun 05, 2019 3:01 pm • #  
User avatar
New Member

Joined: Wed Jun 05, 2019 3:35 am
Posts: 5
Hi Guys,
I'm based in Sydney and I have been collecting some vintage rods, Sportex, Butterworth etc. Recently I've come across some Michell Conolon Companion Spiraflex. The model numbers are 61:132 11ft, 62:126 10ft 6 and a guy on another forum has a 42:108.
I've been told they may have come out of the Kilwell factory in New Zealand.
What period are we looking at? I take the last 3 numbers to be length in inches, but what about the first 2, do they represent wraps or casting weights?
Any advice would be much appreciated.
Ryder.


Top
  
 
 Offline
PostPosted: Fri Jun 07, 2019 7:26 am • #  
User avatar
Global Moderator

Joined: Mon Apr 19, 2010 7:00 pm
Posts: 1339
Location: West Virginia, USA
Greetings Ryder,
Welcome to the Mitchell Reel Museum.
I think you must have asked a tougher question since there's not been answer in a couple days.
I wish I could help, but this isn't in my area. But hang in there, one of the mates may be away fishing and will help when they return.

Regards,
Ted Lanham


Top
  
 
 Offline
PostPosted: Fri Jun 07, 2019 6:46 pm • #  
User avatar
New Member

Joined: Wed Jun 05, 2019 3:35 am
Posts: 5
Thanks Ted,
I found a little something which suggests Garcia Conolon set up the Kilwell factory in the 1960s.
http://fiberglassflyrodders.com/forum/v ... =3&t=17390


Top
  
 
 Offline
PostPosted: Sun Jun 09, 2019 9:02 am • #  
User avatar
Global Moderator

Joined: Mon Apr 19, 2010 7:00 pm
Posts: 1339
Location: West Virginia, USA
Ryder,
Thanks for the link about conolons produced in that part of the world. I don't believe that I had ever read anything like this before.

Regards,
Ted Lanham


Top
  
 
 Offline
PostPosted: Sun Jun 09, 2019 1:32 pm • #  
User avatar
Jr. Member

Joined: Sun May 26, 2019 6:02 pm
Posts: 20
Hey Ryder,

Very interesting! Hopefully we may dig up more.

I have seen some scant information.

Australia imported Conolon blanks and manufactured rods domestically - which was helpful in not having to pay importation tariffs. I can't locate my sourcing on this - whether it occurred in the 1960's or '70's.

My sense about New Zealand back then (please correct/update me if otherwise) is that the government restricted imports to encourage domestic manufacture. For instance, Kilwell partnered with ABU (Sweden) in order to be able to manufacture ABU metal lures in New Zealand from 1964 to 1985 (I have a copy of the incorporation document). Kilwell, at that time, was also active importing lures, such as Lemax (Switzerland), Norwich (UK), Hot Shot (US), Mitchell (France), and other(s). I was also aware Kilwell imported Conolon blanks then, but knew not much of the specifics (other than some fly rods) until your updated post.


Mates,

This is Halcyon (in the interest of full disclosure).

Long story here: cleared cache, failed hard drive, lost password, no help for a month from administrator to get back in MRM as Halcyon. And, I have run out of email addresses in order to be able to create yet another new profile, such as Halcyon1.

Best wishes to all.

John


Top
  
 
 Offline
PostPosted: Sun Jun 09, 2019 6:57 pm • #  
User avatar
Sr. Member

Joined: Mon Apr 23, 2018 3:35 am
Posts: 248
Welcome back John,
I was waiting for you to join this thread :sFun_eyescan: :tup

May your lines always be tight, Don


Top
  
 
 Offline
PostPosted: Mon Jun 10, 2019 8:10 pm • #  
User avatar
Sr. Member

Joined: Wed Oct 27, 2010 7:00 pm
Posts: 690
I hope these pictures upload. May answer some questions. On different SLOW computer. Have had them since 10/10/2005. Lost out on ebay..........
Kim :sCo_hmmthink:

Well they did not upload. Will transfer them to my phone and go from there. Sorry for the suspense..........

And yes the mega pixels were within parameters....


Top
  
 
 Offline
PostPosted: Mon Jun 10, 2019 10:20 pm • #  
User avatar
Jr. Member

Joined: Sun May 26, 2019 6:02 pm
Posts: 20
Ryder and Mates,

The fly rod images from Fiberglass Flyrodders' Forum linked above by Ryder and one of Wayne Real's fly rods shown at realsreels.com have decals that show Kilwell-ABU Conolon. So, those Spiraflex fly rods were from the period of the Kilwell-ABU partnership.

Wayne has a few Kilwell catalogs from the 60's-70's at his site (linked below). Many of the images enlarge or link to catalog pages, that include some Kilwell history and pages with rods.

I still haven't been able to find the email with Conolon blanks importation to Australia information.

John


Top
  
 
 Offline
PostPosted: Mon Jun 10, 2019 11:27 pm • #  
User avatar
Jr. Member

Joined: Sun May 26, 2019 6:02 pm
Posts: 20
Hey Ryder,

I'm not seeing "Kilwell-ABU" in the image of your Kilwell "Mitchell Companion" rod that you posted elsewhere. The Mitchell Companion logo matches that used in the US during the 1950's. So, that rod may predate Kilwell-ABU.

"Custom Line" or "Customline" is a series name I've seen in a couple Killwell catalogs (1968 & 1982), but I have not seen a "Mitchell Companion" series in those Kilwell-ABU era catalogs.

John


Top
  
 
 Offline
PostPosted: Tue Jun 11, 2019 4:13 am • #  
User avatar
New Member

Joined: Wed Jun 05, 2019 3:35 am
Posts: 5
Thanks John.
From a New Zealand forum, the Customline surf and light surf 61 and 62 Spiraflex models were produced from 1972-76. The decals are later than those in the link I added. There is no mention of Abu or Garcia on the rod.
I have no doubt your right about importing blanks and not completed rods to avoid taxes/tariffs.


Top
  
 
 Offline
PostPosted: Tue Jun 11, 2019 5:25 am • #  
User avatar
Jr. Member

Joined: Sun May 26, 2019 6:02 pm
Posts: 20
Hey Ryder,

Sorry, but I don't think you're following what I'm saying.

Does your 62:126 "Mitchell Companion" have "Kilwell-ABU" on it anywhere? From what I could see, no.

"Mudfish marquand" (your NZ responder) referenced the "Custom Line" rods he knew of from 1972-76 without the benefit of a photo of your 62:126 "Mitchell Companion" you had posted at yet another forum. From what I'm seeing, a 1972-76 "Custom Line" rod would have had "Kilwell-ABU" on its decal(s).

John

P.S. A "factory" to assemble rods (that is attach reel mount and handle, wrap line guides) is a relative term. There are companies in the US early days that did this in a barn or garage. So, your Kilwell "Mitchell Companion" could have been assembled in the late 1950's to early/mid 1960's prior to any later larger production operation.


Top
  
 
 Offline
PostPosted: Tue Jun 11, 2019 9:30 am • #  
User avatar
Jr. Member

Joined: Sun May 26, 2019 6:02 pm
Posts: 20
More info from 1968/69 catalog:

The first number in the series indicates the type of rod:
6 for surf and salmon

The second number indicates the number of pieces.


Top
  
 
 Offline
PostPosted: Tue Jun 11, 2019 12:02 pm • #  
User avatar
Jr. Member

Joined: Sun May 26, 2019 6:02 pm
Posts: 20
Ryder,

"Mataura mayfly" was indeed correct in his FFR post you linked, Garcia Conolon helped Kilwell set up a fiberglass factory by 1968 (see 1968/69 catalog excerpt below). So, from then on Conolon rod blanks would have been made in New Zealand.

The excerpt also states that blanks were imported prior to that. I think it's likely that your Kilwell "Mitchell Companion" was prior to 1968.

John
Attachment:
Conolon excerpt 1968.jpg


You do not have the required permissions to view the files attached to this post.


Top
  
 
 Offline
PostPosted: Tue Jun 11, 2019 6:52 pm • #  
User avatar
Jr. Member

Joined: Sun May 26, 2019 6:02 pm
Posts: 20
Mates,

Here are Kim’s (piscesman’s) photo’s he referred to above. They are of a Kilwell “Mitchell Companion” 32-78.
Attachment:
mitchellcompanion1.jpg

Attachment:
mitchellcompanion2.jpg


Below is the Kilwell-ABU Conolon decal. Such a decal is present on the Kilwell “Custom Line” 32-78 included in the 1968/69 catalog. I don’t yet for certain know how long this decal was used, other than by 1982 there appears have been another rod decal in use.

John
Attachment:
Kilwell-ABU Conolon decal.jpg


You do not have the required permissions to view the files attached to this post.


Top
  
 
 Offline
PostPosted: Thu Jun 13, 2019 3:33 am • #  
User avatar
New Member

Joined: Wed Jun 05, 2019 3:35 am
Posts: 5
Thanks again John,
Your advice on the 61,62 makes perfect sense.
I originally posted the question on Fishraider my local forum.https://www.fishraider.com.au/topic/892 ... -treasure/

I didn't realise there was so much history behind the brand, brands until I found this forum, I love a bit of research.
The is no mention of Abu, Garcia or Kilwell on the rod.

The rod appears to be painted, gel coated or expoxyed in a kind of olive brown. A few spot of wear reveal the blank is a deep red colour. All the guides are just wire, no inserts.


Top
  
 
 Offline
PostPosted: Thu Jun 13, 2019 9:00 am • #  
User avatar
Jr. Member

Joined: Sun May 26, 2019 6:02 pm
Posts: 20
Hey Ryder,

In 1958, Narmco Conolon announced a new finish, Conolock (without saying what type it was), that bonded to the rod blank and was UV resistant. I've seen Conolock advertised on later Garcia Conolon rods. Unknown to me whether Kilwell used Conolock.

Also starting in 1958, Conolon had a new version of fiberglass that had a reddish brown resin (visible on rods with clear finish), while the earlier fiberglass version was honey-colored between brown fibers. Again unknown later, whether Kilwell used Conolon's resin for its fiberglass, but likely.

What about your 61-132? Is it really a 1-piece 11-footer as the model number would indicate? What does/do its decal(s) say and look like?

John

Oh, and Kilwell started in 1958.


Top
  
 
 Offline
PostPosted: Fri Jun 14, 2019 5:39 am • #  
User avatar
New Member

Joined: Wed Jun 05, 2019 3:35 am
Posts: 5
The 61:132 was the first one I found. It came in a lot of 4 surf rods. The decals were for the most part gone. All I had to go on was Custom Line 61:132, and the seller telling me Mitchell Conolon.
The blank is 11ft, with a sand spike insert bringing it up to 11ft6.
The decals are the same style as the other, and where the coating has worn off you can see the same deep red colour of the blank.


Top
  
 
Display posts from previous:  Sort by  

  Page 1 of 1   [ 17 posts ]
New Topic Add Reply

All times are UTC - 5 hours [ DST ]



Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
[ Time : 0.131s | 13 Queries | GZIP : Off ]